CRL Diamond Style Spindle Medium Duty 105 Degree Hold Open Retrofit Overhead Concealed Closer Body Only by CR Laurence: Tools & Home Improvement

Tools & Home Improvement Access the most advanced RSS tools and use them to your advantage.

CRL Diamond Style Spindle Medium Duty 105 Degree Hold Open Retrofit Overhead Concealed Closer Body Only by CR Laurence Mar 31st 2013, 09:08 Category: Tools & Home Improvement Vendor: Spindle Set in the Diamond Position at 0?. Suitable for Doors From 30" (762 mm) to 48" (1,219 mm) Wide U.L. Listed With a Five Product Description : Spindle Set in the Diamond Position at 0?. Suitable for Doors From 30" (762 mm) to 48" (1,219 mm) Wide U.L. Listed With a Five Year Limited WarrantyWarranty Information and Cross Reference Chart Available The CRL Diamond Spindle Retrofit Overhead Concealed Closer incorporates a spindle set in the diamond position instead of a squared position at 0??. This enables door installers to retrofit existing pre-1998 Kawneer? Husky? style closers without the need to change the existing Center-Hung or Offset Arms, which require a diamond pattern spindle engagement. With the addition of our accessory Retrofit Clips for either four inch (101.6 millimeter) CRL8010RK4 or 4-1/2 inch (114.3 millimeter) CRL8010RK45 headers, the existing closer can be replaced with this industry standard compact closer body in either Medium Duty or A.D.A. Spring sizes. These Closers are available in either Hold or Non Hold-Open models.Accessory Mounting Clips CRL8010RK4 or CRL8010RK45 are required to install this Closer.NOTE: This Retrofit Closer is not the same size and will not mount using existing hole patterns as the original pre-1998 Kawneer Husky. This Retrofit Closer may require extensive retrofit work to the header to install properly.Husky and Kawneer are registered trademarks of Kawneer Company, Inc.Important NotesThis Closer is not to be used for doors weighing in excess of 200 Lbs. (91 Kg) or wider than 48" (1,219 mm).

You are receiving this email because you subscribed to this feed at blogtrottr.com. If you no longer wish to receive these emails, you can unsubscribe from this feed, or manage all your subscriptions